LED Staff Kit

A festival-bright, programmable LED staff for flow artists.

Updated summer 2026. This is the latest revision of the kit, not the older version.

Two RGB Critter BT Light Engines joined back to back drive a full staff, 23 to 83 inches depending on the tube length you pick. Silicone end caps absorb impact and add just enough weight for smooth contact moves and high-speed spins. Because it runs on two Critters, the staff in your bag is also two sabers, or a saber and a light painting rig, whenever you want it to be.

Everything you need is in the box: both light engines, batteries, the two tube adapters and the connector. Pick your tube pattern (Sol, Honeycomb, Butterfly or Stellar) and length (6, 12, 18, 24, 30 or 36 inch) when you order.

What's included

• 2x saber tube in the pattern and length you choose (Sol, Honeycomb, Butterfly or Stellar; 6, 12, 18, 24, 30 or 36 inch)
• 2x Saber Twist-On Cap, one included with each saber tube at no extra cost, for its threaded tip. White with Sol tubes, Clear with Honeycomb, Butterfly or Stellar
• 2x RGB Critter BT Light Engine
• 2x RGB Critter Tube Adapter, Long, black, to mount the tubes
• Critter Connector, to join the two light engines back to back into a full staff (23 to 83 inches depending on tube length)
• 2x Flow Cap (Clear), one for each free tube end
• 2x 2500mAh 18650 rechargeable battery
• 2x USB-C charging cable

How it goes together

The mounting end of a saber tube is bare, with no thread, so the adapters in this kit are what hold the tubes on the lights. The other end of a saber tube is threaded from the factory, which is where the two Saber Twist-On Caps in this kit go. Light painting tubes are different: only the 36 inch length is threaded, and the 5 to 29 inch lengths have no threads on either end.

1. Twist an RGB Critter Tube Adapter (Long) onto the front of each RGB Critter BT, push a tube into its socket and lock the two set screws.
2. Join the two light engines back to back with the Critter Connector to form the full staff.
3. Thread a Saber Twist-On Cap into each free tube tip, then push a Flow Cap (Clear) on over the top of it for impact protection. Both caps go on the same end, so it is never a choice between them.

Features

• Use with or without the app
• Programmable
• Grippy, impact-resistant silicone housing
• USB-C rechargeable, 7-hour runtime
• 2-Year Warranty

Keep learning: Best LED staffs 2026, compared honestly · Best light-up flow props · Compare all kits

Shop the range: All LED flow props